Heavy closed die forging press
3000 Ton Die Forging Press
Higher force for larger closed die forgings, with the stiffness and control needed for tight tolerances.

A 3000 ton die forging press is built for larger closed die forgings that need more force than a medium press can give. With about 30,000 kN of force, it suits front axle parts, medium crankshafts, large flanges, gear rings and heavy fittings.
Every 3000 ton press from Hind Presses & Automation is engineered around your part, material and output. It is part of our close die forging presses range and can be supplied as a single press or with heating, handling and trimming as a full line.
Key features
Heavy-duty frame
Pre-stressed or four-column frame sized for continuous forging at full load.
Tight tolerances
Long guides and a stiff slide keep dies parallel for accurate part thickness.
Programmable cycle
Approach, pressing, dwell and return set per part and stored as recipes.
Strong ejectors
Top and bottom ejectors for deep impressions and long parts.
Die protection
Overload control and pressure monitoring protect the dies and the press.
Line integration
Ready for robots, transfer, induction heating and trimming.
Where a 3000 ton die forging press is used
Forge shops move to the 3000 ton class when parts get bigger or when a 2000 ton press is running close to its limit. Common uses are commercial vehicle axle parts, crankshafts, gear rings and large flanges. Extra force also helps with alloy steels and with dies that combine blocking and finishing.
Specifications
| Nominal force | 3000 ton (about 30,000 kN) |
|---|---|
| Press type | Closed die forging hydraulic press |
| Frame | Pre-stressed or four-column, chosen per application |
| Bed, stroke and daylight | Configured to your die set and part height |
| Ejectors | Top and bottom, sized to the part |
| Controls | PLC and HMI with recipes, data logging and diagnostics |
| Typical parts | Axle parts, crankshafts, gear rings, large flanges |
What you get
- Press sized for your largest forging
- FEA-checked frame and cylinders
- Hydraulic system with cooling and filtration
- Top and bottom ejectors
- PLC controls with recipe memory
- Installation, commissioning and training
- Spares and service support in India
3000 ton die forging press vs 2000 ton
The 3000 ton press costs more and needs a larger foundation, but it forges bigger parts and leaves more safety margin. If your largest part needs close to 2,000 ton, a 3000 ton press usually gives longer die life and steadier quality. Our engineers compare both options for your part list.
Information we need
Share the part drawing, weight, material, forging temperature and annual output. For the next size up, see our 5000 ton die forging press.
Why Hind Presses & Automation
Every die forging press we supply is engineered for your parts, not picked from a catalogue. The engineering behind our presses dates back to 1956, and more than 250 engineers, including 5 PhD specialists, design them with advanced finite element analysis. Sales, installation, training and service support come from our Faridabad office.
Frequently asked questions
What is a 3000 ton die forging press used for?
It forges larger closed die parts such as axle parts, crankshafts, gear rings and large flanges.
How much is 3000 ton in kN?
About 30,000 kN, or 30 MN.
Can the press be supplied with automation?
Yes. We integrate induction heating, robots, transfer systems and trimming presses.
What foundation does the press need?
Foundation size depends on the final press design. We share foundation drawings with the proposal.
What is the price of a 3000 ton die forging press?
The price depends on frame, size, drive and automation. Send your requirement for a quotation.
More die forging presses
- 300 Ton Die Forging Press
- 500 Ton Die Forging Press
- 2000 Ton Die Forging Press
- 5000 Ton Die Forging Press
- 25000 Ton Multi-Directional Die Forging Press
- 30000 Ton Superplastic Isothermal Forging Press
- Conventional Close Die Forging Press
- Multi-Directional Die Forging Press
- Close die forging hydraulic presses
Not sure which machine fits your part? Talk to our engineers or call +91-96541 87777.
Watch the press in action
Other presses we supply

SMC and Composite Hydraulic Presses
Compression moulding presses for SMC, BMC and composite components.
View details
Open Die Forging Hydraulic Presses
Open die forging hydraulic presses from 800 to 22,000 ton with manipulators and automation.
View details
Close Die Hydraulic Forging
Precision close die forging presses for repeatable near-net-shape parts.
View details
Hot Stamping Hydraulic Presses
Press hardening presses for ultra high strength automotive parts.
View details
Ring Blank Hydraulic Forging Press
Ring blank forging presses, including 5,000 ton ring forging presses.
View details
Ship Building Hydraulic Presses
Plate bending, forming and flanging presses for shipyards.
View detailsTell us your requirement. An engineer will reply on WhatsApp.
Share tonnage, material, part size and annual output for a fast, accurate quotation.
