Press hardening for automotive parts
Hot Forming Hydraulic Press
Fast closing and high-force dwell for forming and quenching boron steel in one stroke.

A hot forming hydraulic press forms heated boron steel blanks and quenches them inside the die. The blank arrives at about 900 °C, the press closes fast, and then holds full force while the cooled die hardens the part. The result is an ultra-high-strength part used in car body safety structures.
Hind Presses & Automation builds hot forming hydraulic presses as part of our hot stamping presses range. Each press is configured for your parts, blank sizes and line speed.
Key features
Very fast closing
High-speed approach so the blank reaches the die while it is still hot.
Full-force dwell
Holds full tonnage during in-die quenching for accurate, hard parts.
Short cycle
Fast pressure build-up and quick return to raise strokes per minute.
Large bolster
Bed size to suit multi-cavity and large body part dies.
Die cooling ready
Interfaces for die cooling water flow and temperature monitoring.
Line integration
Linked with the furnace, robots or transfer and part cooling conveyor.
How a hot forming hydraulic press works
A boron steel blank is heated in a furnace until it is fully austenitic. A robot or transfer moves it into the press within a few seconds. The press closes fast, forms the part, and then holds force while water-cooled dies quench it. The part leaves the press hard and dimensionally stable.
Specifications
| Force | Configured to your part and die, typically 800 to 1,200 ton class |
|---|---|
| Press type | Hot forming (press hardening) hydraulic press |
| Material | Boron steel, such as 22MnB5, with or without coating |
| Bed and stroke | Configured to your dies and automation |
| Cycle | Fast closing, quench dwell and fast opening |
| Controls | PLC and HMI with recipes and process monitoring |
| Typical parts | B-pillars, A-pillars, bumper beams, door beams, tunnels, roof rails |
What you get
- Press sized for your parts and dies
- Fast-acting hydraulic system with accumulators
- Die cooling interfaces
- PLC controls with process monitoring
- Furnace and automation interfaces
- Installation, commissioning and training
- Spares and service in India
Why carmakers use hot formed parts
Press-hardened parts reach very high strength, so thinner and lighter parts can be used without losing crash safety. They also spring back very little, which helps accuracy. This is why hot forming is widely used for pillars, beams and other safety parts.
Hydraulic or servo mechanical?
A hydraulic press is simple and gives full force during the dwell. A servo mechanical hot forming press or multi-link hot forming press can run faster in high-volume lines. We compare both for your output.
Why Hind Presses & Automation
Hot forming lines need the press, automation and furnace to work as one. We plan the full line with you, engineer the press with finite element analysis, and support installation, start-up and service in India from Faridabad. Our engineering team of more than 250 engineers builds on press experience going back to 1956.
Frequently asked questions
What is a hot forming hydraulic press?
It is a fast hydraulic press that forms heated boron steel blanks and quenches them in a cooled die to make ultra-high-strength parts.
What temperature is the blank heated to?
Typically around 900 to 950 °C, so the steel is fully austenitic before forming.
Why does the press hold force at the bottom?
The dwell keeps the part in contact with the cooled die so it quenches and hardens accurately.
Can you supply the furnace and automation?
Yes. We can supply or integrate the full hot forming production line.
What is the price of a hot forming hydraulic press?
The price depends on force, bed size and line scope. Share your requirement for a quotation.
More hot forming equipment
- Hot Forming Production Line
- Hot Stamping Production Process
- Servo Mechanical Hot Forming Press
- Multi-Link Hot Forming Press
- Hot stamping hydraulic presses
Not sure which machine fits your part? Talk to our engineers or call +91-96541 87777.
Watch the press in action
Other presses we supply

SMC and Composite Hydraulic Presses
Compression moulding presses for SMC, BMC and composite components.
View details
Open Die Forging Hydraulic Presses
Open die forging hydraulic presses from 800 to 22,000 ton with manipulators and automation.
View details
Close Die Hydraulic Forging
Precision close die forging presses for repeatable near-net-shape parts.
View details
Hot Stamping Hydraulic Presses
Press hardening presses for ultra high strength automotive parts.
View details
Ring Blank Hydraulic Forging Press
Ring blank forging presses, including 5,000 ton ring forging presses.
View details
Ship Building Hydraulic Presses
Plate bending, forming and flanging presses for shipyards.
View detailsTell us your requirement. An engineer will reply on WhatsApp.
Share tonnage, material, part size and annual output for a fast, accurate quotation.
