Tandem press lines
Stamping Production Line
Press lines with automation that turn steel and aluminium blanks into body and structural parts at steady output.

A stamping production line forms sheet metal blanks into finished parts through a series of presses. The first press usually does a deep draw, and the next presses trim, flange and pierce the part. Robots or transfer systems move parts between presses, so the line runs as one machine.
Hind Presses & Automation supplies stamping production lines with hydraulic, mechanical or servo presses, sized to your parts and volume. For the most flexible option, see our full servo stamping line.
Key features
Tandem layout
Draw, trim, flange and pierce presses in one synchronised line.
Automation
Robots or crossbar transfer for fast, safe part handling.
Quick die change
Moving bolsters and die change systems for short set-up times.
Flexible press types
Hydraulic, mechanical or servo presses per operation.
Quality control
Monitoring of force, position and timing on each press.
Turnkey supply
Layout, foundations, installation and commissioning support.
How a stamping production line works
Blanks are destacked and fed into the first press for drawing. Each part then moves press by press, with one operation in each. The finished part is unloaded at the end of the line, inspected and stacked. All presses and automation are timed together to keep a steady output.
Specifications
| Line type | Tandem stamping production line |
|---|---|
| Presses | Draw press plus trim, flange and pierce presses |
| Press drive | Hydraulic, mechanical or servo |
| Automation | Robots or crossbar transfer |
| Die change | Moving bolsters and die change carts |
| Controls | Line PLC with HMI and recipes |
| Typical parts | Body panels, structural parts, brackets, appliance parts |
What you get
- Line layout and simulation
- Draw and secondary presses
- Press-to-press automation
- Quick die change systems
- Line controls and safety
- Installation, commissioning and training
- Spares and service support
Choosing presses for a stamping production line
A hydraulic press gives full force and dwell for deep draws. A mechanical press is fast for simple operations. A servo press combines speed with programmable motion. Many lines use a mix. We study your parts and volumes to choose the best combination.
Hot or cold stamping?
Most body panels are cold stamped. Ultra-high-strength safety parts are often hot stamped. See our hot forming production line and servo mechanical hot forming press.
Why Hind Presses & Automation
Stamping lines are long-term investments, so we plan the layout, motion and automation with you before we build. Our presses are engineered with finite element analysis by a team of more than 250 engineers, and supported with installation, training and service across India.
Frequently asked questions
What is a stamping production line?
It is a series of presses linked by automation that form sheet metal blanks into finished parts.
What presses are used in a stamping line?
Usually a draw press followed by trim, flange and pierce presses, which can be hydraulic, mechanical or servo.
Can you automate an existing line?
Yes. We can study your presses and suggest automation and controls upgrades.
What parts are made on a stamping line?
Car body panels, structural parts, brackets and appliance parts.
What is the price of a stamping production line?
The price depends on press count, sizes and automation. Share your parts and volume for a quotation.
How many presses does a stamping line need?
Most body panel lines use four to six presses: one draw press and three to five secondary presses. Simple parts may need fewer.
Can the line run different parts?
Yes. Quick die change systems let the line switch parts in a short time, so many part numbers can run on one line.
More stamping equipment
Not sure which machine fits your part? Talk to our engineers or call +91-96541 87777.
Watch the press in action
Other presses we supply

SMC and Composite Hydraulic Presses
Compression moulding presses for SMC, BMC and composite components.
View details
Open Die Forging Hydraulic Presses
Open die forging hydraulic presses from 800 to 22,000 ton with manipulators and automation.
View details
Close Die Hydraulic Forging
Precision close die forging presses for repeatable near-net-shape parts.
View details
Hot Stamping Hydraulic Presses
Press hardening presses for ultra high strength automotive parts.
View details
Ring Blank Hydraulic Forging Press
Ring blank forging presses, including 5,000 ton ring forging presses.
View details
Ship Building Hydraulic Presses
Plate bending, forming and flanging presses for shipyards.
View detailsTell us your requirement. An engineer will reply on WhatsApp.
Share tonnage, material, part size and annual output for a fast, accurate quotation.
