SMC compression moulding
SMC Press Manufacturer in India
Fast, precise hydraulic presses for SMC, BMC and composite parts, from small covers to large panels.

An SMC press is a hydraulic compression moulding press for sheet moulding compound (SMC). A charge of SMC is placed in a heated mould, the press closes fast, then presses slowly while the material flows and cures. The press must keep the mould parallel and pressure steady so the part has even thickness and a good surface.
Hind Presses & Automation supplies SMC presses for automotive, electrical, railway and building parts. For the full range of composite presses, see our SMC and composite hydraulic presses page.
Key features
Fast closing
High-speed approach so the charge starts flowing before it cures.
Parallelism control
Active levelling keeps the mould parallel for even thickness.
Precise pressure
Stable pressing and curing pressure for good surface finish.
Slow pressing speed
Controlled speed during flow to avoid defects.
Mould heating interface
Connections for mould temperature control.
Automation ready
Charge loading and part unloading by robot.
How an SMC press moulds a part
A cut SMC charge is placed on the heated lower mould. The press closes fast to just above the charge, then slows down. Pressure makes the material flow to fill the cavity. The press holds pressure while the resin cures. Then it opens and the part is removed.
Specifications
| Press type | SMC compression moulding hydraulic press |
|---|---|
| Force | Configured to part area and moulding pressure |
| Bed and daylight | Configured to your moulds |
| Parallelism | Active four-corner levelling option |
| Controls | PLC with recipes for speed, pressure and cure time |
| Materials | SMC, BMC, GMT and other composites |
| Typical parts | Body panels, battery covers, electrical enclosures, meter boxes, panels |
What you get
- Press sized for your moulds
- Fast-acting hydraulic system
- Active parallelism control option
- Recipe-based controls
- Mould heating interfaces
- Installation, commissioning and training
- Spares and service support
Why parallelism matters in an SMC press
Large SMC parts are thin and wide. If the mould tilts even slightly while closing, thickness varies and the surface can show defects. Active parallelism control corrects tilt in real time, which is important for automotive panels and battery covers.
Related presses
For metal forming, see our hydroforming press and hot forming hydraulic press.
Why Hind Presses & Automation
Special presses need careful engineering for force, motion and control. Our team of more than 250 engineers, including 5 PhD specialists, designs each press with finite element analysis. We support you with installation, commissioning, operator training, spares and service from Faridabad.
Frequently asked questions
What is an SMC press?
It is a hydraulic compression moulding press used to mould sheet moulding compound (SMC) into composite parts.
What parts are made with an SMC press?
Automotive panels, battery covers, electrical enclosures, meter boxes and building panels.
Why is parallelism control needed?
It keeps the mould level during pressing, giving even thickness and a good surface on large parts.
Can the press mould BMC and GMT too?
Yes. The press can be set up for SMC, BMC, GMT and similar composites.
What is the price of an SMC press?
The price depends on force, bed size and controls. Share your requirement for a quotation.
What is the difference between SMC and BMC?
SMC is supplied as sheets with longer fibres for large thin parts. BMC is a dough-like compound used for smaller, thicker parts.
How long is a typical SMC cycle?
It depends on part thickness and resin. Curing time is usually the longest step, so the press must close and open quickly.
More special hydraulic presses
- Hydroforming Press
- 150-500 Ton Die Spotting Hydraulic Press
- 25000 Ton Die Try-Out Hydraulic Press
- Try-Out Press
- All hydraulic presses
Not sure which machine fits your part? Talk to our engineers or call +91-96541 87777.
Watch the press in action
Other presses we supply

SMC and Composite Hydraulic Presses
Compression moulding presses for SMC, BMC and composite components.
View details
Open Die Forging Hydraulic Presses
Open die forging hydraulic presses from 800 to 22,000 ton with manipulators and automation.
View details
Close Die Hydraulic Forging
Precision close die forging presses for repeatable near-net-shape parts.
View details
Hot Stamping Hydraulic Presses
Press hardening presses for ultra high strength automotive parts.
View details
Ring Blank Hydraulic Forging Press
Ring blank forging presses, including 5,000 ton ring forging presses.
View details
Ship Building Hydraulic Presses
Plate bending, forming and flanging presses for shipyards.
View detailsTell us your requirement. An engineer will reply on WhatsApp.
Share tonnage, material, part size and annual output for a fast, accurate quotation.
