High-output press hardening
Servo Mechanical Hot Forming Press
Servo drive with programmable motion: fast closing, controlled forming and a dwell for in-die quenching.

A servo mechanical hot forming press uses servo motors to drive a mechanical slide, so the slide motion can be programmed stroke by stroke. It closes fast, slows down for forming, then dwells at the bottom while the cooled die quenches the boron steel part. This gives high output with lower energy use.
Hind Presses & Automation offers servo mechanical presses for high-volume hot forming lines and for servo stamping work. It is part of our hot stamping presses range.
Key features
Programmable motion
Slide speed and position set freely for each part and die.
Bottom dwell
Slide holds at the bottom for in-die quenching.
High strokes per minute
Faster cycles than a hydraulic press in many hot forming jobs.
Energy saving
Servo drive with energy storage cuts peak power demand.
Precise bottom position
Repeatable slide position for consistent part thickness.
Line-ready
Synchronised with furnace, transfer and robots.
How a servo mechanical hot forming press differs from a hydraulic press
A hydraulic press uses oil pressure and can hold full force for as long as needed. A servo mechanical press uses motors and a mechanical drive, which is faster and more energy-efficient, and still allows a programmed dwell. For high-volume lines, the servo option often gives more parts per hour.
Specifications
| Force | Configured to your parts and dies |
|---|---|
| Press type | Servo mechanical hot forming press |
| Drive | Servo motors with mechanical slide drive |
| Motion | Programmable, with bottom dwell for quenching |
| Bed and stroke | Configured to your dies and automation |
| Controls | Servo controller with motion profiles and recipes |
| Typical parts | Pillars, beams, rails and other hot stamped parts |
What you get
- Press sized for your parts and volume
- Servo drive with energy storage
- Programmable motion profiles
- Die cooling interfaces
- Line automation interfaces
- Installation, commissioning and training
- Spares and service in India
Uses beyond hot forming
The same servo technology is used in cold stamping. A servo press can run slow for deep draws and fast for simple parts. Read about our full servo stamping line for body panel production.
Related hot forming options
Compare the multi-link hot forming press and the hot forming hydraulic press, or plan a complete hot forming production line.
Why Hind Presses & Automation
Hot forming lines need the press, automation and furnace to work as one. We plan the full line with you, engineer the press with finite element analysis, and support installation, start-up and service in India from Faridabad. Our engineering team of more than 250 engineers builds on press experience going back to 1956.
Frequently asked questions
What is a servo mechanical hot forming press?
It is a mechanical press driven by servo motors, with programmable slide motion and a bottom dwell for in-die quenching of hot formed parts.
Is a servo press faster than a hydraulic press?
In many hot forming lines, yes. It can reach more strokes per minute while still holding a dwell.
Does a servo press save energy?
Yes. Servo drives use power only when needed and energy storage reduces peak demand.
Can it be used for cold stamping too?
Yes. Servo presses are also used for cold stamping and deep drawing.
What is the price?
The price depends on force, bed size and line scope. Share your requirement for a quotation.
What is a bottom dwell?
It is a short pause of the slide at the bottom of the stroke. In hot forming, it keeps the part pressed against the cooled die so it quenches evenly.
Can existing dies be used?
Often yes, if the die height, bolster size and cooling connections suit the press. Share your die data and we will check.
More hot forming equipment
- Hot Forming Hydraulic Press
- Hot Forming Production Line
- Hot Stamping Production Process
- Multi-Link Hot Forming Press
- Hot stamping hydraulic presses
Not sure which machine fits your part? Talk to our engineers or call +91-96541 87777.
Watch the press in action
Other presses we supply

SMC and Composite Hydraulic Presses
Compression moulding presses for SMC, BMC and composite components.
View details
Open Die Forging Hydraulic Presses
Open die forging hydraulic presses from 800 to 22,000 ton with manipulators and automation.
View details
Close Die Hydraulic Forging
Precision close die forging presses for repeatable near-net-shape parts.
View details
Hot Stamping Hydraulic Presses
Press hardening presses for ultra high strength automotive parts.
View details
Ring Blank Hydraulic Forging Press
Ring blank forging presses, including 5,000 ton ring forging presses.
View details
Ship Building Hydraulic Presses
Plate bending, forming and flanging presses for shipyards.
View detailsTell us your requirement. An engineer will reply on WhatsApp.
Share tonnage, material, part size and annual output for a fast, accurate quotation.
